How to Implement Custom Layers for VPU (Intel® Neural Compute Stick 2)

To enable operations not supported by OpenVINO™ out of the box, you need a custom extension for Model Optimizer, a custom nGraph operation set, and a custom kernel for the device you will target. This page describes custom kernel support for one the VPU, the Intel® Neural Compute Stick 2 device, which uses the MYRIAD device plugin.

NOTE:

  • OpenCL custom layer support is available in the preview mode.

  • This section assumes you are familiar with developing kernels using OpenCL.

To customize your topology with an OpenCL layer, carry out the tasks described on this page:

  1. Write and compile your OpenCL code with the standalone offline OpenCL compiler (clc).

  2. Write a configuration file to bind the OpenCL kernel to the topology file (.xml) of the model IR.

  3. Pass the configuration file to the OpenVINO™ Runtime with the model IR.

Compile OpenCL code for VPU (Intel® Neural Compute Stick 2)

Note

OpenCL compiler, targeting Intel® Neural Compute Stick 2 for the SHAVE processor only, is redistributed with OpenVINO.

OpenCL support is provided by ComputeAorta and is distributed under a license agreement between Intel® and Codeplay Software Ltd. The OpenCL toolchain for the Intel® Neural Compute Stick 2 supports offline compilation only. Start with compiling OpenCL C code, using the standalone clc compiler. You can find the compiler binary at <INSTALL_DIR>/tools/cl_compiler.

Note

By design, custom OpenCL layers support any OpenCL kernels written assuming OpenCL version 1.2. It also supports half float extension and is optimized for this type, because it is a native type for Intel® Movidius™ VPUs.

  1. Prior to running a compilation, make sure that the following variables are set:

  • SHAVE_MA2X8XLIBS_DIR=<INSTALL_DIR>/tools/cl_compiler/lib/

  • SHAVE_LDSCRIPT_DIR=<INSTALL_DIR>/tools/cl_compiler/ldscripts/

  • SHAVE_MYRIAD_LD_DIR=<INSTALL_DIR>/tools/cl_compiler/bin/

  • SHAVE_MOVIASM_DIR=<INSTALL_DIR>/tools/cl_compiler/bin/

Run the compilation with the command below. You should use --strip-binary-header to make an OpenCL runtime-agnostic binary runnable with the OpenVINO™ Runtime.

cd <INSTALL_DIR>/tools/cl_compiler/bin
./clc --strip-binary-header custom_layer.cl -o custom_layer.bin

Write a Configuration File

To tie the topology IR for a layer you customize, prepare a configuration file, so that the OpenVINO™ Runtime can find parameters for your kernel and the execution work grid is described. For example, consider the following OpenCL kernel signature:

__kernel void reorg_nhwc(__global const half \*src, __global half \*out, int w, int h, int c, int stride);

A configuration file for this kernel might be the following:

<CustomLayer name="ReorgYolo" type="MVCL" version="1">
   <Kernel entry="reorg_nhwc">
       <Source filename="reorg.bin"/>
   </Kernel>
   <Parameters>
       <Tensor arg-name="src"    type="input"  port-index="0"                format="BYXF"/>
       <Tensor arg-name="out"    type="output" port-index="0"                format="BYXF"/>
       <Scalar arg-name="w"      type="int"    port-index="0" source="I.X"                />
       <Scalar arg-name="h"      type="int"    port-index="0" source="I.Y"                />
       <Scalar arg-name="c"      type="int"    port-index="0" source="I.F"                />
       <Scalar arg-name="stride" type="int"                   source="stride"             />
   </Parameters>
   <WorkSizes dim="input,0" global="(Y+7)/8\*8,1,1" local="8,1,1"/>
</CustomLayer>

Each custom layer is described with the CustomLayer node. It has the following nodes and attributes:

  • Root node CustomLayer contains the following attributes:

    • name – (Required) The name of the OpenVINO™ Runtime layer to bind the kernel with.

    • type and version – (Required) Reserved for future use. Set them to MVCL and 1 respectively.

    • max-shaves – (Optional) The maximum number of SHAVE cores that should be dedicated for the layer. It is useful for debugging concurrency issues or for resource saving that memory bound kernel does not scale well with the number of cores, so more resources can be left for the rest of a topology.

  • Sub-node Kernel must contain the following attributes:

    • entry – The name of your kernel function as you defined it in a source file. In the example above, it is reorg_nhwc.

    • Node Source must contain the following attributes:

      • filename – The path to a compiled binary relative to the XML configuration file.

  • Sub-node Parameters – Describes parameters bindings. For more information, see the description below.

  • Sub-node WorkSizes – Describes local and global work group sizes and the source for dimension deduction as a pair direction,port. In the example above, the work group is described relatively to the dimension of the input tensor that comes through port 0 in the OpenVINO IR. Work group configurations, namely global and local support any simple math expressions with +,-,*,/, and () from B (batch), Y (height), X (width) and F (channels).

  • Sub-node Where – Allows to customize bindings with the key="value" attribute. For example, to substitute only 3x3 convolutions, write <Where kernel="3,3"/> in the binding xml.

Parameter description supports Tensor of one of tensor types such as input, output, input_buffer, output_buffer or data, Scalar, or Data nodes and has the following format:

  • Each Tensor node of input or output type must contain the following attributes:

    • arg-name – The name of a kernel parameter in the kernel signature.

    • type – Node type: input or output as specified in the IR.

    • port-index – A number of input/output ports as specified in the IR.

    • format – The channel order in the tensor. Optional conversion layers are generated if the custom layer format is not compatible with formats of neighboring layers. BFXY, BYXF, and ANY formats are supported currently.

  • Each Tensor node of input_buffer or output_buffer type must contain the following attributes:

    • arg-name – The name of a kernel parameter in the kernel signature.

    • type – Node type: input_buffer or output_buffer. Use the appropriate type to bind multiple kernels that correspond to different stages of the same layer.

    • port-index – The unique identifier to bind by.

    • dim – The dim source with the same direction,port format used for WorkSizes bindings.

    • size – Amount of bytes needed. Current expression syntax supports only expression over dimensions of over selected input/output tensor or constants and might be extended in the future.

    Here is an example of multi-stage MVN layer binding:

    <CustomLayer name="MVN" stage="0" type="MVCL" version="1">
        <Kernel entry="reduction_mean">
            <Source filename="mvn.bin"/>
        </Kernel>
        <Parameters>
            <Tensor arg-name="src"                type="input"         port-index="0"               format="BFYX"/>
            <Tensor arg-name="mean"               type="output_buffer" port-index="0" dim="output,0" size="Y\*F\*4"/>
            <Tensor arg-name="variance"           type="output_buffer" port-index="1" dim="output,0" size="Y\*F\*4"/>
            <!--other parameters  -->
        </Parameters>
        <WorkSizes dim="output,0" global="((Y+7)/8)\*8,F,1" local="8,1,1"/>
    </CustomLayer>
    <CustomLayer name="MVN" stage="1" type="MVCL" version="1">
        <Kernel entry="mvn_scale">
            <Source filename="mvn_scale_changed_orded.bin"/>
        </Kernel>
        <Parameters>
            <Tensor arg-name="src_data"           type="input"        port-index="0"               format="BFYX"/>
            <Tensor arg-name="dst_data"           type="output"       port-index="0"               format="BFYX"/>
            <Tensor arg-name="mean_part"          type="input_buffer" port-index="0" dim="output,0" size="Y\*F\*4"/>
            <Tensor arg-name="power_mean"         type="input_buffer" port-index="1" dim="output,0" size="Y\*F\*4"/>
            <!--other parameters  -->
        </Parameters>
        <WorkSizes dim="output,0" global="((Y+7)/8)\*8,F,1" local="8,1,1"/>
    </CustomLayer>
  • Each Tensor node that has the data type must contain the following attributes:

    • source – A name of the blob as it is in the IR. Typical example is weights for convolution.

    • format – Specifies the channel order in the tensor. Optional conversion layers are generated if the custom layer format is not.

      <CustomLayer name="BinaryConvolution" type="MVCL" version="1">
        <Kernel entry="binary_convolution">
            <Source filename="binary_layers.bin"/>
        </Kernel>
        <Parameters>
            <Tensor arg-name="src_data"      type="input"   port-index="0"                      format="BFYX"/>
            <Data   arg-name="weights_data"  type="data"                     source="weights"   format="ANY"/>
            <Tensor arg-name="dst_data"      type="output"  port-index="0"                      format="BFYX"/>
            <!--other parameters  -->
        </Parameters>
        <WorkSizes dim="output,0" global="X,Y,F" local="1,1,1"/>
      </CustomLayer>
  • Each Scalar node must contain the following attributes:

    • arg-name – The name of a kernel parameter in the kernel signature.

    • typeint or float value. It is used for correct argument extraction from IR parameters.

    • source – Contains the name of the parameter in the IR file or input/output (I / O, In / On, where n is a port number) followed by dimension B (batch), Y (height), X (width), or F (channels).

  • Each Data node must contain the following attributes:

    • arg-name – The name of a kernel parameter in the kernel signature.

    • type – Node type. Currently, local_data is the only supported value, which defines buffer allocated in fast local on-chip memory. It is limited to 100KB for all __local and __private arrays defined inside the kernel as well as all __local parameters passed to the kernel. A manual-DMA extension requires double buffering. If the custom layer is detected to run out of local memory, the inference fails.

    • dim – The dim source with the same direction,port format used for WorkSizes bindings.

    • size – Amount of bytes needed. The current expression syntax supports only expression over dimensions of over selected input/output tensor or constants and may be extended in the future. The example binding below illustrates a kernel with two local buffers passed to the kernel.

      <CustomLayer name="GRN" type="MVCL" version="1">
          <Kernel entry="grn_NCHW">
              <Source filename="grn.bin"/>
          </Kernel>
          <Parameters>
              <Tensor arg-name="src_data" type="input"         port-index="0"                  format="BFYX"/>
              <Tensor arg-name="dst_data" type="output"        port-index="0"                  format="BFYX"/>
              <Data   arg-name="src"      type="local_data"                      dim="input,0" size="X\*F\*2" />
              <Data   arg-name="dst"      type="local_data"                      dim="input,0" size="X\*F\*2" />
              <Scalar arg-name="C"        type="int"           port-index="0"    source="I.F"               />
              <Scalar arg-name="bias"     type="float"                           source="bias"              />
          </Parameters>
          <WorkSizes dim="input,0" global="X,Y,1" local="X,1,1"/>
      </CustomLayer>

Pass Configuration File to OpenVINO™ Runtime

Note

If both native and custom layer implementations are present, the custom kernel has a priority over the native one.

Before loading the network that features the custom layers, provide a separate configuration file and load it using the ov::Core::set_property() method. Use the “CONFIG_KEY” key and the configuration file name as a value before loading the network that uses custom operations to the plugin:

ov::Core core;
// Load Myriad Extensions
core.set_property("MYRIAD", {{CONFIG_KEY(CONFIG_FILE), "<path_to_the_xml_file>"}});

Optimizing Kernels with OpenCL for VPU (Intel® Neural Compute Stick 2)

This section provides optimization guidelines on writing custom layers with OpenCL for VPU devices. Knowledge about general OpenCL programming model and OpenCL kernel language is assumed and not a subject of this section. The OpenCL model mapping to VPU is described in the table below.

OpenCL Model

VPU Mapping

Device code

Executed on SHAVE cores

Private memory

Mapped to CMX internal memory, limited to 100KB per work group, valid only while the work group is executed

Local memory

Mapped to CMX internal memory, limited to 100KB per work group, valid only while the work group is executed

Global memory

Mapped to DDR, used to pass execution preserved parameters for inputs, outputs, and blobs

Work group

Executed on a single SHAVE core iterating over multiple work items

The work group execution order is not defined in the OpenCL specifications. This means it is your responsibility to ensure that race conditions among work groups are not introduced. Custom layer runtime distributes work grid evenly among available compute resources and executes them in an arbitrary order. This static scheduling approach works best if the load is evenly spread out across work groups, which is a typical case for Deep Learning kernels. The following guidelines are recommended to use for work group partitioning:

  1. Distribute work evenly across work groups.

  2. Adjust work group granularity to maintain equal workload for all compute codes.

  3. Set the maximum number of cores using the max-shaves attribute for the CustomLayer node. This keeps more resources for the rest of topology. It is also useful if the kernel scalability reached its limits, which may happen while optimizing memory bound kernels or kernels with poor parallelization.

  4. Try an alternate data layout (BFXY / BYXF) for the kernel to see if it improves work group partitioning or data access patterns. Consider not just specific layer boost, but also full topology performance because data conversion layers will be automatically inserted as appropriate.

Offline OpenCL compiler (clc) features automatic vectorization over get_global_id(0) usage, if uniform access is detected. For example, the kernel below could be automatically vectorized:

__kernel void cvtf32f16(__global float\* restrict inImage, __global half\*  restrict outImage,
                        float   scale, float   bias)
{
    int idx = get_global_id(0) + get_global_id(1) \* get_global_size(0) + get_global_id(2) \* get_global_size(0) \* get_global_size(1);
    outImage[idx] = convert_half(inImage[idx]\*scale+bias);
}

However, this work-group based vectorizer (WGV) conflicts with the default LLVM vectorizer based on superword level parallelism (SLP) for the current compiler version. Manual vectorization is recommended to provide the best performance for non-uniform code patterns. WGV works if and only if vector types are not used in the code.

Here is a short list of optimization tips:

  1. Help auto-vectorizer ensure non-aliasing pointers for kernel parameters by putting the restrict markers where possible.

    • This can give a performance boost, especially for kernels with unrolling, like the ocl_grn from the example below.

    • Place restrict markers for kernels with manually vectorized codes. In the ocl_grn kernel below, the unrolled version without the restrict is up to 20% slower than the most optimal one, which combines both unrolling and restrict.

  2. Put #pragma unroll N to your loop header. The compiler does not trigger unrolling by default, so it is your responsibility to annotate the code with pragmas as appropriate. The ocl_grn version with #pragma unroll 4 is up to 50% faster, most of which comes from unrolling the first loop, because LLVM, in general, is better in scheduling 3-stage loops (load-compute-store), while the first loop The variance += (float)(src_data[c\*H\*W + y\*W + x] \* src_data[c\*H\*W + y\*W + x]); is only 2-stage (load-compute). Pay attention to unrolling such cases first. Unrolling factor is loop-dependent. Choose the smallest number that still improves performance as an optimum between the kernel size and execution speed. For this specific kernel, changing the unroll factor from 4 to 6 results in the same performance, so unrolling factor equal to 4 is an optimum. For Intel Neural Compute Stick 2, unrolling is conjugated with the automatic software pipelining for load, store, and compute stages:

    __kernel void ocl_grn(__global const half\* restrict src_data, __global half\* restrict dst_data, int C, float bias)
    {
        int x = get_global_id(0);
        int W = get_global_size(0);
        int y = get_global_id(1);
        int H = get_global_size(1);
        float variance = bias + 1e-9f;
        #pragma unroll 4
        for (int c = 0; c < C; c++)
            variance += (float)(src_data[c\*H\*W + y\*W + x] \* src_data[c\*H\*W + y\*W + x]);
        variance = 1.f / native_sqrt(variance);
        #pragma unroll 4
        for (int c = 0; c < C; c++)
            dst_data[c\*H\*W + y\*W + x] = (half)((float)src_data[c\*H\*W + y\*W + x] \* variance);
    }

    To check the efficiency of WGV, compare performance of the kernel above with the kernel below, which is manually vectorized over width:

    __kernel void ocl_grn_line(__global const half\* restrict src_data,  __global half\* restrict dst_data, int C, int W, float bias)
    {
        int y   = get_global_id(1);
        int H   = get_global_size(1);
        for (int x = 0; x < W/8; x++)
        {
            float8 variance = (float8)(bias+1e-9f);
            #pragma unroll 4
            for (int c = 0; c < C; c++)
            {
                __global const half8\* restrict src_line = ((__global const half8 \* restrict)(src_data + c\*H\*W + y\*W));
                half8 sh = src_line[x];
                variance += convert_float8(sh\*sh);
            }
            variance = 1.f/native_sqrt(variance);
            #pragma unroll 4
            for (int c = 0; c < C; c++)
            {
                __global const half8\* restrict src_line = ((__global const half8 \* restrict)(src_data + c\*H\*W + y\*W));
                __global       half8\* restrict dst_line = ((__global       half8 \* restrict)(dst_data + c\*H\*W + y\*W));
                dst_line[x] = convert_half8(convert_float8(src_line[x])\*variance);
            }
        }
        for (int x = W/8\*8; x < W; x++)
        {
            float variance = bias+1e-9f;
            #pragma unroll 4
            for (int c = 0; c < C; c++)
                variance += (float)(src_data[c\*H\*W + y\*W + x]\*src_data[c\*H\*W + y\*W + x]);
            variance = 1.f/native_sqrt(variance);
            #pragma unroll 4
            for (int c = 0; c < C; c++)
                dst_data[c\*H\*W + y\*W + x] = (float)src_data[c\*H\*W + y\*W + x]\*variance;
        }
    }

    Both versions perform the same, but the second one has more complex code.

  3. If it is easy to predict the work group size, use the reqd_work_group_size kernel attribute to ask the compiler to unroll the code up to the local size of the work group. If the kernel is actually executed with the different work group configuration, the result is undefined.

  4. Prefer to use the half compute if it keeps reasonable accuracy. A 16-bit float is a native type for Intel Neural Compute Stick 2, most of the half_\* functions are mapped to a single hardware instruction. Use the standard native_\* function for the rest of types.

  5. Prefer to use the convert_half function over the vstore_half if conversion to 32-bit float is required. The convert_half function is mapped to a single hardware instruction. For the cvtf32f16 kernel above, the outImage[idx] = convert_half(inImage[idx]\*scale+bias); code is eight times slower than the code with vstore_half.

  6. Be aware of early exits, as they can be extremely costly for the current version of the clc compiler due to conflicts with the auto-vectorizer. It is recommended to setup local size by x dimension equal to inputs or/and outputs width. If it is impossible to define the work grid that exactly matches inputs or/and outputs to eliminate checks, for example, if (get_global_id(0) >= width) return, use line-wise kernel variant with manual vectorization. The kernel example below demonstrates the impact of early exits on kernel performance.

    // Initial version
    __kernel void reorg(const __global half\* restrict src, __global half\* restrict out, int stride)
    {
      int w = get_global_id(0);
      int W = get_global_size(0);
      int h = get_global_id(1);
      int H = get_global_size(1);
      int c = get_global_id(2);
      int C = get_global_size(2);
      int C2 = C/(stride\*stride);
      int offset = c / C2;
      int c2 = c - C2 \* offset;
      int H2 = H\*stride;
      int W2 = W\*stride;
      int h2 = h\*stride + offset / stride;
      int w2 = w\*stride + offset - stride \* (offset / stride);
      out[W\*H\*c + W\*h + w] = src[W2\*H2\*c2 + W2\*h2 + w2];
    }

    This reorg kernel is auto-vectorizable, but an input for YOLO v2 topology is NCHW=<1,64,26,26> and it is not multiple of vector width, which is 8 for half data type. As a result, the Inference Engine does not select the auto-vectorized kernel. To compare performance of auto-vectorized and scalar version of the kernel, change the input size to NCHW=<1,64,26,32>. This enables the auto-vectorized version to be selected by the Inference Engine and can give you about 30% uplift. Since the auto-vectorized version is faster, it is recommended to enable it for the YOLO v2 topology input size by setting the local size multiple of vector, for example, 32, and adjust global sizes accordingly. As a result, the execution work grid exceeds actual input dimension, so out-of-bound checks should be inserted. See the updated kernel version below:

    // Version with out-of-bound checks added
    __kernel void reorg(const __global half\* restrict src, __global half\* restrict out, int W, int stride)
    {
      int w = get_global_id(0);
      w = min(w, W-1);
      int h = get_global_id(1);
      int H = get_global_size(1);
      int c = get_global_id(2);
      int C = get_global_size(2);
      int C2 = C/(stride\*stride);
      int offset = c / C2;
      int c2 = c - C2 \* offset;
      int H2 = H\*stride;
      int W2 = W\*stride;
      int h2 = h\*stride + offset / stride;
      int w2 = w\*stride + offset - stride \* (offset / stride);
      out[W\*H\*c + W\*h + w] = src[W2\*H2\*c2 + W2\*h2 + w2];
    }

    This code performs the same as the initial kernel above (scalar) due to branching overhead. If the w = min(w, W-1); min/max expression is replaced with the if (w >= W) return;, runtime increases up to 2x against to code without branching (initial version).

    If branching is inevitable for your element-based kernel, it is recommended to change the scheme to line-based. See the kernel variant below:

    // Line-wise version
    __kernel void reorg(const __global half\* restrict src, __global half\* restrict out, int H, int W, int stride)
    {
        int h = min((int)get_global_id(0), H-1);
        int c = get_global_id(1);
        int C = get_global_size(1);
        int C2 = C/(stride\*stride);
        int offset = c / C2;
        int c2 = c - C2 \* offset;
        int H2 = H\*stride;
        int W2 = W\*stride;
        for (int w = 0; w < W; ++w)
        {
            int h2 = h\*stride + offset / stride;
            int w2 = w\*stride + offset - stride \* (offset / stride);
            out[W\*H\*c + W\*h + w] = src[W2\*H2\*c2 + W2\*h2 + w2];
        }
    }

    This decreases the execution time up to 40% against the best performing vectorized kernel without early exits (initial version).

  7. Reuse computations among work items by using line-based kernels or sharing values through the __local memory.

  8. Improve data access locality. Most of custom kernels are memory bound while convolution and fully connected layers are hardware-implemented. The code below demonstrates a further optimized version of the reorg kernel unrolled by the stride :

    // Unrolled line-wise version
    __kernel void reorg_unrolled_by_stride(const __global half\* restrict src, __global half\* restrict dst,
                                           int H, int W, int stride)
    {
      int h = min((int)get_global_id(0), H-1);
      int c2 = get_global_id(1);
      int C2 = get_global_size(1);
      int C = C2\*stride\*stride;
      int H2 = H\*stride;
      int W2 = W\*stride;
      for (int stride_y = 0; stride_y < stride; stride_y++)
        for (int stride_x = 0; stride_x < stride; stride_x++)
          for (int w2 = 0, w = 0; w < W; w2 += stride, w++)
            dst[W\*H\*C2\*(stride_y\*stride+stride_x) + W\*H\*c2 + W\*h + w] = src[W2\*H2\*c2 + W2\*h\*stride + W2\*stride_y + w2 + stride_x];
    }

    The scr data in this case is loaded only once. As the result, the cycle count drops up to 45% against the line-wise version.

  9. Copy data from the __dlobal to the __local or __private memory if the data is accessed more than once. Access to the __dlobal memory is orders of magnitude slower than access to the __local / __private due to statically scheduled pipeline, which stalls completely on memory access without any prefetch. The same recommendation is applicable for scalar load/store from/to the __blobal pointer since work-group copying could be done in a vector fashion.

  10. Use a manual DMA extension. Local (on-chip) memory throughput is up to 24x higher than DDR throughput. Since the OpenVINO 2020.1 release, VPU OpenCL features manual-DMA kernel extension to copy sub-tensor used by a work group into local memory and performing compute without DDR evolved. Here is the simple GRN kernel implementation that runs over DDR. Local size is in the form (width of the input tensor, 1, 1) to define a large enough work group to get code automatically vectorized and unrolled, while global size is (width of the input tensor, height of the input tensor, 1):

    __kernel void grn_NCHW(
      __global const half\* restrict src_data,
      __global       half\* restrict dst_data,
      int C,
      float bias)
    {
      float variance = bias + 1e-9f;
      #pragma unroll 4
      for (int c = 0; c < C; c++)
      {
        float val = (float) src_data[c\*get_global_size(1)\*get_global_size(0) + get_global_id(1)\*get_global_size(0) + get_global_id(0)];
        variance += val\*val;
      }
      half hvariance = (half)(native_rsqrt((half)(variance/16.f))\*0.25f);
      #pragma unroll 4
      for (int c = 0; c < C; c++)
      {
        dst_data[c\*get_global_size(1)\*get_global_size(0) + get_global_id(1)\*get_global_size(0) + get_global_id(0)]
        = src_data[c\*get_global_size(1)\*get_global_size(0) + get_global_id(1)\*get_global_size(0) + get_global_id(0)] \* hvariance;
      }
    }

This kernel can be rewritten to introduce the __dma_preload and __dma_postwrite intrinsics special data binding. This means that instead of one kernel, a group of three kernels should be implemented: kernelName, __dma_preload_kernelName, and __dma_postwrite_kernelName. The __dma_preload_kernelName kernel for a particular work group n is guaranteed to be executed before the n -th work group itself, while the __dma_postwrite_kernelName is guaranteed to be executed after a corresponding work group. One of those functions may be defined to copy data from-to __global and __local memory. The syntactics requires exact functional signature match. The example below illustrates how to prepare your kernel for manual-DMA.

__kernel void __dma_preload_grn_NCHW(
  __global const half\* restrict src,
  __global       half\* restrict dst,
  __local        half\* restrict local_src,
  __local        half\* restrict local_dst,
  int C,
  float bias)
  {
  // ToDO: copy required piece of src tensor into local_src
}

__kernel void __dma_postwrite_grn_NCHW(
  __global const half\* restrict src,
  __global       half\* restrict dst,
  __local  const half\* restrict local_src,
  __local        half\* restrict local_dst,
  int C,
  float bias)
{
  // ToDO: copy back computed piece of local_dst into dst
}

__kernel void grn_NCHW(
  __global const half\* restrict src_data,
  __global       half\* restrict dst_data,
  __local        half\* restrict src,
  __local        half\* restrict dst,
  int C,
  float bias)
{
  // same as the example above
}

The GRN kernel operates on channel-major tensors to compute average over full channel range and then normalizes input elements to produce the output. As a part of the manual DMA extension, a group of work group copy functions are introduced in addition to async_work_group_copy, which is also mapped to a DMA call.

Here is the list of supported functions:

// 2D sub-tensor copy
event_t WorkGroupDmaCreateStrideTransaction(
                const local T \*src,
                global T \*dst,
                size_t  src_width, // width of the line of source in bytes
                size_t  dst_width, // width of the line of destination in bytes
                size_t  src_stride, // stride between corresponding 2 consecutive lines of source in bytes
                size_t  dst_stride, // stride between corresponding 2 consecutive lines of destination in bytes
                size_t size, // total number of bytes loaded for all lines from source to destination
                event_t  event) __OVERLOAD;
event_t WorkGroupDmaCreateStrideTransaction(
                const global T \*src,
                local T \*dst,
                size_t  src_width, // width of the line of source in bytes
                size_t  dst_width, // width of the line of destination in bytes
                size_t  src_stride, // stride between corresponding 2 consecutive lines of source in bytes
                size_t  dst_stride, // stride between corresponding 2 consecutive lines of destination in bytes
                size_t size, // total number of bytes loaded for all lines from source to destination
                event_t  event) __OVERLOAD;
// 3D sub-tensor copy
event_t WorkGroupDmaCreate3DTransaction(
                 const local T \*src,
                 global T \*dst,
                 size_t  src_width, // width of the line of source in bytes
                 size_t  dst_width, // width of the line of destination in bytes
                 size_t  src_stride, // stride between corresponding 2 consecutive lines of source in bytes
                 size_t  dst_stride, // stride between corresponding 2 consecutive lines of destination in bytes
                 size_t  num_planes, // number of planes to be copied
                 size_t  src_plane_stride, // stride between corresponding 2 consecutive planes of source in bytes
                 size_t  dst_plane_stride, // stride between corresponding 2 consecutive planes of destination in bytes
                 size_t  size, // size of the loaded plane in bytes, analogues to the size in 2D case
                 event_t  event) __OVERLOAD;
event_t WorkGroupDmaCreate3DTransaction(
                 const global T \*src,
                 local T \*dst,
                 size_t  src_width, // width of the line of source in bytes
                 size_t  dst_width, // width of the line of destination in bytes
                 size_t  src_stride, // stride between corresponding 2 consecutive lines of source in bytes
                 size_t  dst_stride, // stride between corresponding 2 consecutive lines of destination in bytes
                 size_t  num_planes, // number of planes to be copied
                 size_t  src_plane_stride, // stride between corresponding 2 consecutive planes of source in bytes
                 size_t  dst_plane_stride, // stride between corresponding 2 consecutive planes of destination in bytes
                 size_t  size, // size of the loaded plane in bytes, analogues to the size in 2D case
                 event_t  event) __OVERLOAD;

where T can be uchar, char, short, ushort, int, uint, long, ulong, half or float.

Modified version of the GRN kernel could be the following:

__kernel void __dma_preload_grn_NCHW(
    __global const half\* restrict src,
    __global       half\* restrict dst,
    __local        half\* restrict local_src,
    __local        half\* restrict local_dst,
    int C,
    float bias)
{
    WorkGroupDmaCreate3DTransaction(
        src + get_group_id(0)\*get_local_size(0)
            + get_group_id(1)\*get_local_size(1)\*get_global_size(0), // src
        local_src, // dst
        get_local_size(0) \* sizeof(half), // src width
        get_local_size(0) \* sizeof(half), // dst width
        get_global_size(0) \* sizeof(half), // src stride
        get_local_size(0) \* sizeof(half), // dst stride
        C, // num planes
        get_global_size(0) \* get_global_size(1) \* sizeof(half), // src plane stride
        get_local_size(0) \* get_local_size(1) \* sizeof(half), // dst plane stride
        get_local_size(0) \* get_local_size(1) \* sizeof(half), // plane size
        0);
}
__kernel void __dma_postwrite_grn_NCHW(
    __global const half\* restrict src,
    __global       half\* restrict dst,
    __local  const half\* restrict local_src,
    __local        half\* restrict local_dst,
    int C,
    float bias)
{
    WorkGroupDmaCreate3DTransaction(
        local_dst, // src
        dst + get_group_id(0)\*get_local_size(0)
            + get_group_id(1)\*get_local_size(1)\*get_global_size(0), // dst
        get_local_size(0) \* sizeof(half), // src width
        get_local_size(0) \* sizeof(half), // dst width
        get_local_size(0) \* sizeof(half), // src stride
        get_global_size(0) \* sizeof(half), // dst stride
        C, // num planes
        get_local_size(0) \* get_local_size(1) \* sizeof(half), // src plane stride
        get_global_size(0) \* get_global_size(1) \* sizeof(half), // dst plane stride
        get_local_size(0) \* get_local_size(1) \* sizeof(half), // plane size
        0);
}
__kernel void grn_NCHW(
    __global const half\* restrict src_data,
    __global       half\* restrict dst_data,
    __local        half\* restrict src,
    __local        half\* restrict dst,
    int C,
    float bias)
{
    float variance = bias + 1e-9f;
    #pragma unroll 8
    for (int c = 0; c < C; c++)
    {
        float val = (float) src[c\*get_local_size(1)\*get_local_size(0) + get_local_id(1)\*get_local_size(0) + get_local_id(0)];
        variance += val\*val;
    }
    half hvariance = (half)(native_rsqrt((half)(variance/16.f))\*0.25f);
    #pragma unroll 8
    for (int c = 0; c < C; c++)
    {
        dst[c\*get_local_size(1)\*get_local_size(0) + get_local_id(1)\*get_local_size(0) + get_local_id(0)]
        = src[c\*get_local_size(1)\*get_local_size(0) + get_local_id(1)\*get_local_size(0) + get_local_id(0)] \* hvariance;
    }
}

Note

The get_local_size and get_local_id usage inside the kernel. 21x speedup is expected for a kernel on enet-curbs setup since it is completely limited by memory usage.

An alternative method to using DMA is to use work item copy extension. Those functions are executed inside a kernel and require work groups equal to single work item.

Here is the list of supported work item functions:

item_dma_event_t WorkItemDmaCreateTransaction(
            const global T \*src,
            private T \*dst,
            size_t  size,
            item_dma_event_t  event) __OVERLOAD;
item_dma_event_t WorkItemDmaCreateTransaction(
            const private T \*src,
            global T \*dst,
            size_t  size,
            item_dma_event_t  event) __OVERLOAD;
item_dma_event_t WorkItemDmaCreateStrideTransaction(
                const global T \*src,
                private T \*dst,
                size_t  src_width,
                size_t  dst_width,
                size_t  src_stride,
                size_t  dst_stride,
                size_t size,
                item_dma_event_t  event) __OVERLOAD;
item_dma_event_t WorkItemDmaCreateStrideTransaction(
                const private T \*src,
                global T \*dst,
                size_t  src_width,
                size_t  dst_width,
                size_t  src_stride,
                size_t  dst_stride,
                size_t size,
                item_dma_event_t  event) __OVERLOAD;
item_dma_event_t WorkItemDmaCreate3DTransaction(
                const global T \*src,
                private T \*dst,
                size_t  src_width,
                size_t  dst_width,
                size_t  src_stride,
                size_t  dst_stride,
                size_t  num_planes,
                size_t  src_plane_stride,
                size_t  dst_plane_stride,
                size_t  size,
                item_dma_event_t  event) __OVERLOAD;
item_dma_event_t WorkItemDmaCreate3DTransaction(
                const private T \*src,
                global T \*dst,
                size_t  src_width,
                size_t  dst_width,
                size_t  src_stride,
                size_t  dst_stride,
                size_t  num_planes,
                size_t  src_plane_stride,
                size_t  dst_plane_stride,
                size_t  size,
                item_dma_event_t  event) __OVERLOAD;

where T can be uchar, char, short, ushort, int, uint, long, ulong, half or float.