OpenVINO Samples

The OpenVINO sample applications are simple console applications that show how to utilize specific OpenVINO API capabilities within an application, assist developers in executing specific tasks such as loading a model, running inference, querying specific device capabilities and etc.

After installation of Intel® Distribution of OpenVINO™ toolkit, С, C++ and Python* sample applications are available in the following directories, respectively:

  • <INSTALL_DIR>/samples/c

  • <INSTALL_DIR>/samples/cpp

  • <INSTALL_DIR>/samples/python

OpenVINO sample applications include the following:

Note

All C++ samples support input paths containing only ASCII characters, except the Hello Classification Sample, that supports Unicode.

Media Files Available for Samples

To run the sample applications, you can use images and videos from the media files collection available at https://storage.openvinotoolkit.org/data/test_data.

Samples that Support Pre-Trained Models

To run the sample, you can use public or Intel’s pre-trained models from the Open Model Zoo. The models can be downloaded using the Model Downloader.

Build the Sample Applications

Build the Sample Applications on Linux*

The officially supported Linux* build environment is the following:

  • Ubuntu* 18.04 LTS 64-bit or Ubuntu* 20.04 LTS 64-bit

  • GCC* 7.5.0 (for Ubuntu* 18.04) or GCC* 9.3.0 (for Ubuntu* 20.04)

  • CMake* version 3.10 or higher

Note

For building samples from the open-source version of OpenVINO™ toolkit, see the build instructions on GitHub.

To build the C or C++ sample applications for Linux, go to the <INSTALL_DIR>/samples/c or <INSTALL_DIR>/samples/cpp directory, respectively, and run the build_samples.sh script:

build_samples.sh

Once the build is completed, you can find sample binaries in the following folders:

  • C samples: ~/inference_engine_c_samples_build/intel64/Release

  • C++ samples: ~/inference_engine_cpp_samples_build/intel64/Release

You can also build the sample applications manually:

Note

If you have installed the product as a root user, switch to root mode before you continue: sudo -i

  1. Navigate to a directory that you have write access to and create a samples build directory. This example uses a directory named build :

    mkdir build

    Note

    If you ran the Image Classification verification script during the installation, the C++ samples build directory was already created in your home directory: ~/inference_engine_cpp_samples_build/

  2. Go to the created directory:

    cd build
  3. Run CMake to generate the Make files for release or debug configuration. For example, for C++ samples:

    • For release configuration:

      cmake -DCMAKE_BUILD_TYPE=Release <INSTALL_DIR>/samples/cpp
    • For debug configuration:

      cmake -DCMAKE_BUILD_TYPE=Debug <INSTALL_DIR>/samples/cpp
  4. Run make to build the samples:

    make

For the release configuration, the sample application binaries are in <path_to_build_directory>/intel64/Release/; for the debug configuration — in  <path_to_build_directory>/intel64/Debug/.

Build the Sample Applications on Microsoft Windows* OS

The recommended Windows* build environment is the following:

  • Microsoft Windows* 10

  • Microsoft Visual Studio* 2019

  • CMake* version 3.10 or higher

Note

 If you want to use Microsoft Visual Studio 2019, you are required to install CMake 3.14 or higher.

To build the C or C++ sample applications on Windows, go to the <INSTALL_DIR>\samples\c or <INSTALL_DIR>\samples\cpp directory, respectively, and run the build_samples_msvc.bat batch file:

build_samples_msvc.bat

By default, the script automatically detects the highest Microsoft Visual Studio version installed on the machine and uses it to create and build a solution for a sample code

Once the build is completed, you can find sample binaries in the following folders:

  • C samples: C:\Users\<user>\Documents\Intel\OpenVINO\inference_engine_c_samples_build\intel64\Release

  • C++ samples: C:\Users\<user>\Documents\Intel\OpenVINO\inference_engine_cpp_samples_build\intel64\Release

You can also build a generated solution manually. For example, if you want to build C++ sample binaries in Debug configuration, run the appropriate version of the Microsoft Visual Studio and open the generated solution file from the C:\Users\<user>\Documents\Intel\OpenVINO\inference_engine_cpp_samples_build\Samples.sln directory.

Build the Sample Applications on macOS*

The officially supported macOS* build environment is the following:

  • macOS* 10.15 64-bit or higher

  • Clang* compiler from Xcode* 10.1 or higher

  • CMake* version 3.13 or higher

Note

For building samples from the open-source version of OpenVINO™ toolkit, see the build instructions on GitHub.

To build the C or C++ sample applications for macOS, go to the <INSTALL_DIR>/samples/c or <INSTALL_DIR>/samples/cpp directory, respectively, and run the build_samples.sh script:

build_samples.sh

Once the build is completed, you can find sample binaries in the following folders:

  • C samples: ~/inference_engine_c_samples_build/intel64/Release

  • C++ samples: ~/inference_engine_cpp_samples_build/intel64/Release

You can also build the sample applications manually:

Note

If you have installed the product as a root user, switch to root mode before you continue: sudo -i

Note

Before proceeding, make sure you have OpenVINO™ environment set correctly. This can be done manually by

cd <INSTALL_DIR>/
source setupvars.sh
  1. Navigate to a directory that you have write access to and create a samples build directory. This example uses a directory named build :

    mkdir build

    Note

    If you ran the Image Classification verification script during the installation, the C++ samples build directory was already created in your home directory: ~/inference_engine_cpp_samples_build/

  2. Go to the created directory:

    cd build
  3. Run CMake to generate the Make files for release or debug configuration. For example, for C++ samples:

    • For release configuration:

      cmake -DCMAKE_BUILD_TYPE=Release <INSTALL_DIR>/samples/cpp
    • For debug configuration:

      cmake -DCMAKE_BUILD_TYPE=Debug <INSTALL_DIR>/samples/cpp
  4. Run make to build the samples:

    make

For the release configuration, the sample application binaries are in <path_to_build_directory>/intel64/Release/; for the debug configuration — in  <path_to_build_directory>/intel64/Debug/.

Get Ready for Running the Sample Applications

Get Ready for Running the Sample Applications on Linux*

Before running compiled binary files, make sure your application can find the OpenVINO Runtime libraries. Run the setupvars script to set all necessary environment variables:

source <INSTALL_DIR>/setupvars.sh

**(Optional)**: The OpenVINO environment variables are removed when you close the shell. As an option, you can permanently set the environment variables as follows:

  1. Open the .bashrc file in <user_home_directory> :

    vi <user_home_directory>/.bashrc
  2. Add this line to the end of the file:

    source /opt/intel/openvino_2022/setupvars.sh
  3. Save and close the file: press the Esc key, type :wq and press the Enter key.

  4. To test your change, open a new terminal. You will see [setupvars.sh] OpenVINO environment initialized.

You are ready to run sample applications. To learn about how to run a particular sample, read the sample documentation by clicking the sample name in the samples list above.

Get Ready for Running the Sample Applications on Windows*

Before running compiled binary files, make sure your application can find the OpenVINO Runtime libraries. Use the setupvars script, which sets all necessary environment variables:

<INSTALL_DIR>\setupvars.bat

To debug or run the samples on Windows in Microsoft Visual Studio, make sure you have properly configured Debugging environment settings for the Debug and Release configurations. Set correct paths to the OpenCV libraries, and debug and release versions of the OpenVINO Runtime libraries. For example, for the Debug configuration, go to the project’s Configuration Properties to the Debugging category and set the PATH variable in the Environment field to the following:

PATH=<INSTALL_DIR>\runtime\bin;%PATH%

where <INSTALL_DIR> is the directory in which the OpenVINO toolkit is installed.

You are ready to run sample applications. To learn about how to run a particular sample, read the sample documentation by clicking the sample name in the samples list above.