Register Remote Target in DL Workbench

Set up your remote target, then follow the instructions below:

Step 1 : Go to the Create Project page.

Step 2 : Select Add Remote Target next to the Environment table.

Step 3 : Fill in the fields shown in the figure and table below. If you are behind a corporate proxy, select the Use Proxy box and provide proxy information.

_images/add_target-001.png

Field

Explanation

Hostname

Name of the host or the IP address for the remote machine. Example: my-machine.remote-host.com

Port

Port for the SSH connection to the remote machine. Default: 22

Target Name

Alias name of the remote machine in the DL Workbench. Example: My Machine

User

User name for the passwordless SSH connection to the remote machine. If you use GPU or MYRIAD devices, sudo privileges for the user are required. Example: root

SSH Key

Private SSH key for authenticated connection to the remote machine. It is generated with the public key that you copy to the remote machine.

HTTP, HTTPS Proxy Hostname

Hostname or IP address for the proxy server connection. Required if the remote machine is behind a proxy.

HTTP, HTTPS Proxy Port

Port for the proxy server connection. Required if the remote machine is behind a proxy.

Proxy-server Username

User name for the proxy server connection. Required if your proxy server uses a password.

Proxy-server Password

Password for the proxy server connection. Required if your proxy server uses a password.

Step 4 : Click Add. The machine is listed to the Target Machines table with a status of Configuring :

_images/configuring-001.png

The Configuration Status and Connection Status tables show you the configuration progress. Click Details to review a log at each stage.

_images/success-001.png

See Troubleshooting to address a Warning or Failure :

  • Warning indicates issues that might limit your actions. Warnings do not prevent work with remote targets. Refer to Troubleshooting to fix an issue:

    _images/warning-001.png

Failure indicates issues that prevent using the remote target. Refer to Troubleshooting to fix an issue:

_images/failure-001.png