Intel® Movidius™ VPUs Setup Guide for Use with Intel® Distribution of OpenVINO™ toolkit¶
Note
These steps are only required for IEI Mustang-V100-MX8-R10 card. IEI Mustang-V100-MX8-R11 card doesn’t require any additional steps and it’s completely configured using the general guidance.
See Also¶
Intel® Movidius™ VPUs Programming Guide for use with the Intel® Distribution of OpenVINO™
Intel® Vision Accelerator Design with Intel® Movidius™ VPUs HAL Configuration Guide
Intel® Vision Accelerator Design with Intel® Movidius™ VPUs Workload Distribution User Guide
Intel® Vision Accelerator Design with Intel® Movidius™ VPUs Scheduler User Guide
Intel® Vision Accelerator Design with Intel® Movidius™ VPUs Errata
The IEI Mustang-V100-MX8 is an OEM version of the Intel® Vision Accelerator Design with Intel® Movidius™ VPUs. This guide assumes you have installed the Mustang-V100-MX8 and the Intel® Distribution of OpenVINO™ Toolkit.
Instructions in this guide for configuring your accelerator include:
Installing the required IEI* BSL reset software
Configuration settings for the
hddldaemonservice
Note
This guide does not apply to Uzel* cards.
IEI Reset Software Installation¶
Using the IEI Mustang-V100-MX8 requires downloading and installing the most current software for your system.
Visit the IEI Download Center for the most current software and documentation. Search for Mustang-V100-MX8.
Download the appropriate software for your system, decompress the downloaded archive, enter the newly created directory, and run the install script:
On Linux *:
Run the
install.sh scriptwithsudo, or asroot.
On Windows *, do one of the following:
GUI : Double-click
install.batCLI : Open a console with administrator privileges, cd into the directory, and run
install.bat.
Mustang-V100-MX8 Service Configuration¶
The hddldaemon is a system service, a binary executable that is run to manage the computational workload on the board. It is a required abstraction layer that handles inference, graphics processing, and any type of computation that should be run on the video processing units (VPUs). Depending on the board configuration, there can be 8 or 16 VPUs.
Note
Graphics and other specialized processing may require some custom development.
Conventions Used in This Document¶
<IE> refers to the following default OpenVINO Inference Engine directories:
Linux:
/opt/intel/openvino_2021/inference_engine
Windows:
C:\Program Files (x86)\IntelSWTools\openvino\inference_engine
If you have installed OpenVINO in a different directory on your system, you will need to enter your unique directory path.
Configuration File Location¶
<IE>\external\hddl\config\hddl_service.config
Service Configuration File Settings¶
Below are some possible configuration options.
Note
After changing a configuration file, the hddldaemon must be restarted.
Recommended Settings¶
device_snapshot_mode
Changes the output of the hddldaemon to display a table with individual VPU statistics.
Default Setting:
"device_snapshot_mode": "none"
Suggested Setting:
"device_snapshot_mode": "full"
Supported Settings:
none(default)basefull
device_snapshot_style
Default Setting:
"device_snapshot_style": "table"
Recommended Setting:
"device_snapshot_style": "table"
The table setting presents labels on the left for each column and is recommended as easier to read.
The tape setting prints the labels in each column.
Supported Settings:
tapetable(default)
user_group
Restricts the service to group members.
Recommended setting depends on your unique system configuration.
Default Setting
"user_group": "users"
The hddldaemon may be restricted to a privileged group of users. The appropriate group will vary according to the local system configuration.
Supported Settings: Valid groups on the current system. The "users" group is a default group that exists on Windows and most Linux distributions.
Optional Recommended Settings:
"device_utilization" : "off"
This setting displays the percent of time each VPU is in use. It appears in the table column when turned on, or if "device_fps" is turned on.
"memory_usage" : "off"
This setting reports the amount of memory being used by each VPU.
"max_cycle_switchout": 3
Requires the squeeze scheduler. This setting might speed up performance significantly, depending on the app.
Note
This setting works in conjunction with: max_task_number_switch_out.
"client_fps" : "off"
This setting reports the total FPS for the dispatching hddl_service (which will have one or more clients per app).
debug_service
"debug_service": "false"
(default: "true")