This section provides a high-level description of the process of integrating the Inference Engine into your application. Refer to the Hello Classification Sample sources for example of using the Inference Engine in applications.
The core libinference_engine.so
library implements loading and parsing a model Intermediate Representation (IR), and triggers inference using a specified device. The core library has the following API:
InferenceEngine::Core
InferenceEngine::Blob
, InferenceEngine::TBlob
, InferenceEngine::NV12Blob
InferenceEngine::BlobMap
InferenceEngine::InputsDataMap
, InferenceEngine::InputInfo
,InferenceEngine::OutputsDataMap
C++ Inference Engine API wraps the capabilities of core library:
Integration process includes the following steps:
1) Create Inference Engine Core to manage available devices and read network objects:
2) Read a model IR created by the Model Optimizer (.xml is supported format):
Or read the model from ONNX format (.onnx and .prototxt are supported formats). You can find more information about the ONNX format support in the document ONNX format support in the OpenVINO™.
3) Configure input and output. Request input and output information using InferenceEngine::CNNNetwork::getInputsInfo()
, and InferenceEngine::CNNNetwork::getOutputsInfo()
methods:
Optionally, set the number format (precision) and memory layout for inputs and outputs. Refer to the Supported configurations chapter to choose the relevant configuration.
You can also allow input of any size. To do this, mark each input as resizable by setting a desired resize algorithm (e.g. BILINEAR
) inside of the appropriate input info.
Basic color format conversions are supported as well. By default, the Inference Engine assumes that the input color format is BGR
and color format conversions are disabled. The Inference Engine supports the following color format conversions:
RGB->BGR
RGBX->BGR
BGRX->BGR
NV12->BGR
where X
is a channel that will be ignored during inference. To enable the conversions, set a desired color format (for example, RGB
) for each input inside of the appropriate input info.
If you want to run inference for multiple images at once, you can use the built-in batch pre-processing functionality.
NOTE: Batch pre-processing is not supported if input color format is set to
ColorFormat::NV12
.
You can use the following code snippet to configure input and output:
NOTE: NV12 input color format pre-processing differs from other color conversions. In case of NV12, Inference Engine expects two separate image planes (Y and UV). You must use a specific
InferenceEngine::NV12Blob
object instead of default blob object and set this blob to the Inference Engine Infer Request usingInferenceEngine::InferRequest::SetBlob()
. Refer to Hello NV12 Input Classification C++ Sample for more details.
If you skip this step, the default values are set:
ColorFormat::RAW
meaning that input does not need color conversionsPrecision::FP32
Layout::NCHW
Number of dimensions | 5 | 4 | 3 | 2 | 1 |
---|---|---|---|---|---|
Layout | NCDHW | NCHW | CHW | NC | C |
4) Load the model to the device using InferenceEngine::Core::LoadNetwork()
:
It creates an executable network from a network object. The executable network is associated with single hardware device. It is possible to create as many networks as needed and to use them simultaneously (up to the limitation of the hardware resources). Third parameter is a configuration for plugin. It is map of pairs: (parameter name, parameter value). Choose device from [Supported devices](@ref openvino_docs_IE_DG_supported_plugins_Supported_Devices) page for more details about supported configuration parameters.
5) Create an infer request:
6) Prepare input. You can use one of the following options to prepare input:
InferenceEngine::InferRequest::GetBlob()
and feed an image and the input data to the blobs. In this case, input data must be aligned (resized manually) with a given blob size and have a correct color format.* **Optimal way for a cascade of networks (output of one network is input for another).** Get output blob from the first request using `InferenceEngine::InferRequest::GetBlob()` and set it as input for the second request using `InferenceEngine::InferRequest::SetBlob()`.
* **Optimal way to handle ROI (a ROI object located inside of input of one network is input for another).** It is possible to re-use shared input by several networks. You do not need to allocate separate input blob for a network if it processes a ROI object located inside of already allocated input of a previous network. For instance, when first network detects objects on a video frame (stored as input blob) and second network accepts detected bounding boxes (ROI inside of the frame) as input. In this case, it is allowed to re-use pre-allocated input blob (used by first network) by second network and just crop ROI without allocation of new memory using `InferenceEngine::make_shared_blob()` with passing of `InferenceEngine::Blob::Ptr` and `InferenceEngine::ROI` as parameters.
Make sure that shared input is kept valid during execution of each network. Otherwise, ROI blob may be corrupted if the original input blob (that ROI is cropped from) has already been rewritten. * Allocate input blobs of the appropriate types and sizes, feed an image and the input data to the blobs, and call `InferenceEngine::InferRequest::SetBlob()` to set these blobs for an infer request:
A blob can be filled before and after `SetBlob()`.
NOTE:
SetBlob()
method compares precision and layout of an input blob with ones defined on step 3 and throws an exception if they do not match. It also compares a size of the input blob with input size of the read network. But if input was configured as resizable, you can set an input blob of any size (for example, any ROI blob). Input resize will be invoked automatically using resize algorithm configured on step 3. Similarly to the resize, color format conversions allow the color format of an input blob to differ from the color format of the read network. Color format conversion will be invoked automatically using color format configured on step 3.GetBlob()
logic is the same for pre-processable and not pre-processable input. Even if it is called with input configured as resizable or as having specific color format, a blob allocated by an infer request is returned. Its size and color format are already consistent with the corresponding values of the read network. No pre-processing will happen for this blob. If you callGetBlob()
afterSetBlob()
, you will get the blob you set inSetBlob()
.
7) Do inference by calling the InferenceEngine::InferRequest::StartAsync
and InferenceEngine::InferRequest::Wait
methods for asynchronous request:
or by calling the InferenceEngine::InferRequest::Infer
method for synchronous request:
StartAsync
returns immediately and starts inference without blocking main thread, Infer
blocks main thread and returns when inference is completed. Call Wait
for waiting result to become available for asynchronous request.
There are three ways to use it:
InferenceEngine::IInferRequest::WaitMode::RESULT_READY
- waits until inference result becomes availableInferenceEngine::IInferRequest::WaitMode::STATUS_ONLY
- immediately returns request status.It does not block or interrupts current thread.Both requests are thread-safe: can be called from different threads without fearing corruption and failures.
Multiple requests for single ExecutableNetwork
are executed sequentially one by one in FIFO order.
While request is ongoing, all its methods except InferenceEngine::InferRequest::Wait
would throw an exception.
8) Go over the output blobs and process the results. Note that casting Blob
to TBlob
via std::dynamic_pointer_cast
is not recommended way, better to access data via buffer()
and as()
methods as follows:
For details about building your application, refer to the CMake files for the sample applications. All samples source code is located in the <INSTALL_DIR>/openvino/inference_engine/samples
directory, where INSTALL_DIR
is the OpenVINO™ installation directory.
project/CMakeLists.txt
NOTE: Make sure Set the Environment Variables step in OpenVINO Installation document is applied to your terminal, otherwise
InferenceEngine_DIR
andOpenCV_DIR
variables won't be configured properly to passfind_package
calls.
NOTE: Before running, make sure you completed Set the Environment Variables section in OpenVINO Installation document so that the application can find the libraries.
To run compiled applications on Microsoft* Windows* OS, make sure that Microsoft* Visual C++ 2017 Redistributable and Intel® C++ Compiler 2017 Redistributable packages are installed and <INSTALL_DIR>/bin/intel64/Release/*.dll
files are placed to the application folder or accessible via PATH%
environment variable.